Choose this device to control a device on a serial port. Optionally, you will need a USB to RS232 converter to connect.
Settings:
| Name | User-friendly name |
|---|---|
| Enable | Activate to enable the device |
| Run at startup | Activate to run the device at Kinetic startup |
| Port | Select the serial port. Go to the device manager to find the good one |
| Baudrate | Select a value from the dropped down list |
| Data Bits | Select a value from the dropped down list |
| Parity | Select option from the dropped down list |
| Stop Bits | Select option from the droped down list |
Task action:
| Enable device | enable the device |
|---|---|
| Disable device | disable the device |
| Send Command | you have to enter the ASCII character string you want to send * |
Task trigger:
You can trigger a task sending an ASCII string terminated with a line feed ( ‘\n’ or 0×0A in hexadecimal format).
You need to enter the same ASCII command without the line feed in the message field.
Digimap trigger:
N/A
Graph:
| Receive value | receive value from serial device |
|---|---|
| Send message | send message on serial device |
User interface:
N/A
Device information:
To test your device you can use this free tools.
Need more help with this?
Don’t hesitate to contact us here.