Select this device to control Epson video projectors.

Compatible mode activated in the Command Communication setting of an Epson projector's menu.


Property Default Description
Name Epson User-friendly name.
Enable ON Toggle to enable/disable the device.
Run at startup ON Toggle to enable the device when Kinetic Designer is launched.
IP [empty] Set the IP address of your device. Your device and Kinetic Designer should be on the same subnet.
Port 3629 TCP/IP port used by the device.
ID 0 Set the projector ID.

Manual controls of the Epson device in the Editor panel.Manual controls of the Epson device in the Editor panel.

Task action

Action Description
Enable device Enable the device
Disable device Disable the device
Power On Send Epson power on command
Power Off Send Epson power off command
Shutter On Send Epson shutter on command
Shutter Off Send Epson shutter off command
Freeze On Send Epson freeze on command
Focus Min Set to min focus value
Focus Max Set to max focus value
Focus Decrement Decrease focus value
Focus Increment Increase focus value
Focus Off Disable focus control
Zoom Min Set to min zoom value
Zoom Max Set to max zoom value
Zoom Decrement Decrease zoom value
Zoom Increment Increase zoom value
Zoom Off Disable zoom control
ShiftHorizontal Min Set to min horizontal shift value
ShiftHorizontal Max Set to max horizontal shift value
ShiftHorizontal Decrement Decrease horizontal shift value
ShiftHorizontal Increment Increase horizontal shift value
ShiftHorizontal Off Disable horizontal shift control
ShiftHorizontal Init Initialize horizontal shift control
ShiftVertical Min Set to min vertical shift value
ShiftVertical Max Set to max vertical shift value
ShiftVertical Decrement Decrease vertical shift value
ShiftVertical Increment Increase vertical shift value
ShiftVertical Off Disable vertical shift control
ShiftVertical Init Initialize vertical shift control
OSD On Send Epson OSD on command
OSD Off Send Epson OSD off command
Recall Lens Position Recall lens position value
Save Lens Position Save lens position value
Delete Lens Position Delete lens position value
Recall Memory Recall memory value
Save Memory Save memory value
Delete Memory Delete memory value

Task trigger

This device has no actions that can trigger a Task.

Digimap trigger

This device cannot be used as a Digimap trigger.


This device has no properties that can be read or written from a Graph.

User interface

When drag & dropped into a UI Panel the following commands are available:

Manual controls of the Epson device in a UI panel.Manual controls of the Epson device in a UI panel.

Device information

Check Epson’s website for more information on their video projectors.

Need more help with this?
Don’t hesitate to contact us here.

Thanks for your feedback.