Creation of a V-Node and the Render Surface

  • First add a V-Node
  • Create a Render Surface about 1920×1080 (which is the default value)
  • On your V-Node select this Render Surface.

Output creation

  • Add an Output about 1920×1080 to the V-Node (which is the default value)
    By default the extracted map area should be good : top,left: 0,0 and size: 1920×1080 and the out area: top,left: 0,0 and size: 1920×1080.
  • Go to the shape subtab and display a test pattern grid.

Activate the demo Output

  • Be sure your projector is connected and set to the good input
  • Check that your laptop is correctly set to Extend these displays (not the Duplicate mode)
  • On Kinetic Designer, right click on the Output you just created and Display on side screen

Need more help with this?
Don’t hesitate to contact us here.

Thanks for your feedback.