In Chapter 2 while we were creating a 3D Preview outputs on the VN02.4.
Now we have different cameras and we will display the point of view of the Cam Prince.
To do so:

  • Open the RS-VNODE timeline
  • Drag & drop the 3D camera Cam Prince into this timeline
  • Check in the Editor tab its Resolution is 1280×800
  • Set its position values to x=7280 y=5000

Now, the camera is display on the Render Surface RS-VN02.

  • If you have a real V-Node, operate an ONLINE to see the camera content on the output

Need more help with this?
Don’t hesitate to contact us here.

Thanks for your feedback.