Select this device to control your Projection Design video projectors.


Property Default Description
Name Projection Design VP User-friendly name.
Enable ON Toggle to enable/disable the device.
Run at startup ON Toggle to enable the device when Kinetic Designer is launched.
IP [empty] Set the IP address of your device. Your device and Kinetic Designer should be on the same subnet.
Port 1025 TCP/IP port used by the device.

Manual controls of the Projection Design device in the Editor panel.Manual controls of the Projection Design device in the Editor panel.

Task action

Action Description
Enable device Enable the device
Disable device Disable the device
Power On Send Projectiondesign power on command
Power Off Send Projectiondesign power off command
Lamp mode Select lamp mode
Shutter On Send Projectiondesign shutter on command
Shutter Off Send Projectiondesign shutter off command
Channel Select channel value
Freeze On Send Projectiondesign freeze on command
Freeze Off Send Projectiondesign freeze off command

Task trigger

This device has no actions that can trigger a Task.

Digimap trigger

This device cannot be used as a Digimap trigger.


This device has no properties that can be read or written from a Graph.

User interface

Need more help with this?
Don’t hesitate to contact us here.

Thanks for your feedback.