Choose this device to control a device sending TCP/IP command.

Settings:

Name User-friendly name
Enable Activate to enable the device
Run at startup Activate to run the device at Kinetic startup
IP Enter your device ip address . Your device and Kinetic Designer need to be in the same subnet
Port Choose the correct TCP/IP port

Task action:

Enable device enable the device
Disable device disable the device
Send Command you have to enter the ASCII character string you want to send *

Task trigger:

You can trigger a task sending an ASCII string terminated with a line feed ( ‘\n’ or 0×0A in hexadecimal format).
You need to enter the same ASCII command without the line feed in the message field.

Digimap trigger:

You can trigger a Digimap sending an ASCII command with a specific syntax terminated with a line feed ( ‘\n’ or 0×0A in hexadecimal format).
The syntax is: name_of_your_command?value\n
name_of_you_command: string
value: float
For example, it can be /modulo/x?124.213\n: you then choose the message /modulo/x and you will receive the value 124.213 in your Digimap.

You need to enter the name of your ASCII command in the message field.

Graph:

Receive value receive value from tcp device
Send message send message on tcp device

User interface:

N/A

Device information:

To test your device, you can use this free tools.

Need more help with this?
Don’t hesitate to contact us here.

Thanks for your feedback.