Choose this device to create a TCP/IP server. other device can connect to this server.
|Activate to enable the device
|Run at startup
|Activate to run the device at Kinetic startup
|Choose the correct TCP/IP port
|enable the device
|disable the device
|you have to enter the ASCII character string you want to send *
You can trigger a task sending an ASCII string terminated with a line feed ( ‘\n’ or 0×0A in hexadecimal format).
You need to enter the same ASCII command without the line feed in the message field.
You can trigger a Digimap sending an ASCII command with a specific syntax terminated with a line feed ( ‘\n’ or 0×0A in hexadecimal format).
The syntax is : name_of_your_command?value\n
For example, it can be /modulo/x?124.213\n: you then choose the message /modulo/x and you will receive the value 124.213 in your Digimap.
You need to enter the name of your ASCII command in the message field.
|receive value from tcp device
|send message on tcp device
To test your device, you can use this free tools.
Need more help with this?
Don’t hesitate to contact us here.