Choose this device to connect to a Phidgets 2× 2A DC Motor DCC1003_0
Control two DC motors from one VINT port with this compact motor controller.


Name User-friendly name
Enable Activate to enable the device
Run at startup Activate to run the device at Kinetic startup
Serial Number: Enter the serial number of the VINT HUB Phidget
Port: Choose port number of the VINT HUB Phidget
interval ms: Choose the refresh interval in milliseconds
Velocity: set the velocity value*
Acceleration: set the acceleration value*
Braking: set the braking value*
Power limit value: set the power limit value*

Task action:

Enable device enable the device
Disable device disable the device
Set limit set power limit value
Set velocity set velocity value
Set acceleration set acceleration value
Move to set acceleration and velocity value

Task trigger:


Digimap trigger:




User interface:


Device information:

Go to this page for more information.
You need to plug this device to a VINT HUB Phidget.

Need more help with this?
Don’t hesitate to contact us here.

Thanks for your feedback.