Choose this device to connect to a Phidgets Dial HIN1101_0
You can then precisely measure the position of the dial use it with a Digimap.
Settings:
| Name | User-friendly name |
|---|---|
| Enable | Activate to enable the device |
| Run at startup | Activate to run the device at Kinetic startup |
| Serial Number: | Enter the serial number of the VINT HUB Phidget |
| Port: | Choose port number of the VINT HUB Phidget |
| Data Interval ms: | Choose the refresh interval in milliseconds |
Task action:
N/A
Task trigger:
You can trigger a task when you press the internal button of the dial.
Select “Button ON” if you want to trigger the task on press, or select “Button OFF” if you want to trigger the task on release.
Digimap trigger:
You will receive the encoder dial position as input.
User interface:
You can add this device in any user panel.
You can then display the dial value.
Device information:
Go to this page for more information.
You need to plug this device to a VINT HUB Phidget.
Need more help with this?
Don’t hesitate to contact us here.