Choose this device to connect to a 4x Isolated Digital Input Phidget DAQ1300_0
Looking to add some serious digital inputs to your VINT Hub?
This module has four active-high digital inputs ideal for reading switches, buttons, digital sensors, and other devices with a logic-level output.
Each input can withstand up to 30V from the devices it’s connected to, and they trigger faster than ordinary VINT digital inputs, making it more likely to trigger from very brief changes.
Settings:
| Name | User-friendly name |
|---|---|
| Enable | Activate to enable the device |
| Run at startup | Activate to run the device at Kinetic startup |
| Serial Number: | Enter the serial number of the VINT HUB Phidget |
| Port: | Choose port number of the VINT HUB Phidget |
Task action:
N/A
Task trigger:
You can trigger a task on a change of the state of the inputs.
Digimap trigger:
N/A
Graph:
N/A
User interface:
You can add this device in any user panel.
You can then display the digital input state.
Device information:
Go to this page for more information.
You need to plug this device to a VINT HUB Phidget.
Need more help with this?
Don’t hesitate to contact us here.