This device is an internal device.
You can use this to control a LED on an user panel from tasks.


Name User-friendly name
Enable Activate to enable the device
Run at startup Activate to run the device at Kinetic startup
On/Off set the device on/off

Task action:

Enable device enable the device
Disable device disable the device
Set state set teh LED On/Off
_.Toggle toggle the LED state

Task trigger:


Digimap trigger:


User interface:

You can add this device in any user panel.
You can then display the LED state.

Device information:


Need more help with this?
Don’t hesitate to contact us here.

Thanks for your feedback.