|Enable||ON||Activate to enable the device.|
|Run at startup||ON||Activate to enable the device at Kinetic startup.|
|Serial Number||empty|| Enter the Serial Number to identify your device or click the
|RGB Enable||OFF||Enable the RGB mode for this device.|
|Mirror Enable||OFF||Enable the Mirror mode for this device.|
|Point Cloud Enable||OFF||Enable the Point Cloud mode for this device.|
|Minimum Range (mm)||540||Change the minimum range for the device.|
|Maximum Range (mm)||8800||Change the maximum range for the device.|
|Remap to 8 bits||ON||Remap data to 8 bits.|
|Min Value (mm)||500||Minimum Value.|
|Max Value (mm)||6000||Maximum Value.|
|Exposure||312||Change the exposure for the camera|
|Gain||8||Add gain to the image detected by the camera|
|Enable||Enable the device.|
|Disable||Disable the device.|
|Start Record||Start a recording with the device.|
|Stop Record||Stop the recording with the device.|
|Start Playback||Start a playback of a recording with the device.|
|Stop Playback||Stop any playback currently playing.|
This device has no actions that can trigger a Task.
|Depth Map||Output the Depth Map (16 bits, millimeter, 1 channel)|
|Color Map||Output the RGB Map|
|Point Cloud||Output the Point Cloud Data from the camera|
This device has no actions that can be launched from the UI designer.
Go to the manufacturer website.
Need more help with this?
Don’t hesitate to contact us here.