Select this device to send PosiStageNet information to the tracking server.
PosiStageNet is an open protocol enabling the broadcast of 3 dimensional position coordinates, velocity, orientation and acceleration data of objects tracked on stage.
|Toggle to enable/disable the device.
|Run at startup
|Toggle to enable the device when Kinetic Designer is launched.
|Set the IP address of your device. Your device and Kinetic Designer should be on the same subnet.
|TCP/IP port used by the device.
|Enable the device
|Disable the device
This device has no actions that can trigger a Task.
|Send 3 dimensional tracker position information to the PosiStage Server
|Send position and velocity
|Send 3 dimensional tracker position and velocity information to the PosiStage Server
|Send position,velocity and acceleration
|Send 3 dimensional tracker position, velocity and acceleration information to the PosiStage Server
|Send position and orientation
|Send 3 dimensional tracker position and orientation information to the PosiStage Server
This device has no actions that can be launched from the UI designer.
Go to the official website for more information.
Need more help with this?
Don’t hesitate to contact us here.