Choose this device to connect to a Phidgets Thumbstick HIN1100_0
Need a user-friendly control panel for your Phidgets project?
Look no further than the Thumbstick Phidget. It provides a familiar 2-axis thumbstick similar to those on a video game controller. The stick springs back to the neutral position when released. It can also be pressed down with a click, which will register in software and can be tied to a function in your software.
Settings:
| Name | User-friendly name |
|---|---|
| Enable | Activate to enable the device |
| Run at startup | Activate to run the device at Kinetic startup |
| Serial Number: | Enter the serial number of the VINT HUB Phidget |
| Port: | Choose port number of the VINT HUB Phidget |
| Data interval ms: | Choose the refresh interval in milliseconds |
Task action:
N/A
Task trigger:
Choose to trigger on pressed or released of the thumbstick.
Digimap trigger:
You can patch the axis X or Y of the thumbstick to this digimap.
Graph:
| Value | Get the value measured on each axis |
|---|---|
| Button pressed | Get the state of the push button |
User interface:
You can add this device in any user panel.
You can then display the X and Y value.
Device information:
Go to this page for more information.
You need to plug this device to a VINT HUB Phidget.
Need more help with this?
Don’t hesitate to contact us here.