Choose this device to connect to a Phidgets Touch Wheel HIN1000_0
Need a user-friendly control panel for your Phidgets project?
Look no further than the Touch Wheel Phidget. This user interface board uses capacitive touch technology, similar to the touchscreen on a smartphone.
Capacitive touch sensors such as this can detect a touch through a piece of glass or plastic of up to 3mm thick, so you can hide this board inside an enclosure or behind a panel.
Settings:
| Name | User-friendly name |
|---|---|
| Enable | Activate to enable the device |
| Run at startup | Activate to run the device at Kinetic startup |
| Serial Number: | Enter the serial number of the VINT HUB Phidget |
| Port: | Choose port number of the VINT HUB Phidget |
| Data interval ms: | Choose the refresh interval in milliseconds |
Task action:
N/A
Task trigger:
Choose to trigger on pressed or released and choose on which button.
Digimap trigger:
N/A
Graph:
| State and value | get the state of all keys and the wheel value |
|---|
User interface:
N/A
Device information:
Go to this page for more information.
You need to plug this device to a VINT HUB Phidget.
Need more help with this?
Don’t hesitate to contact us here.