![Deltacast tab of the VNode Remote settings window Deltacast tab of the VNode Remote settings window]()
This panel lists the available Deltacast live capture cards when they are properly installed on your system.
You can validate that your cards are installed on the right slot with appropriate settings in
BIOS.
To have good performance, check that the value for field
PCI and lane are in green. If you have any issue, please contact the support team.
Check that the temperature is not too high.
You can use this panel to install or update the Deltacast driver.
If you see a warning with “Driver/DLL mismatch”, just update the Deltacast driver with the button “update driver”.
*Updating the Deltacast driver: click on the button “update driver”.
A Windows popup asking to allow a non-certified driver may appear on screen (make sure to check all screens when on multiscreen setup!).
Please wait until the installation is finished (do not reboot before it is over). Sometimes, the driver updates the fimrware of the capture card and you need to wait before rebooting.
!Always use the driver integrated in Modulo Kinetic Vnode application.
NEVER install a driver directly from the Deltacast website.
Both the driver and application version need to match to work properly.