Search
Related topics are listed below.
Project creation
Tutorials – English » Certification tutorials » Start project » Project creation
Create the project folder Before launching Kinetic Designer, create a dedicated project folder in Windows Explorer for the project files and all it’s content. When importing media into your project, Kinetic Designer uses relative filepaths to point to the…
Project creation
Tutorials – English » Certification tutorials » Live Event » Part 1 : Starting the Project » Project creation
By now you should be familiar with the recommended structure of a Project folder. Create the project Create a project folder for this tutorial and extract the content of the Media Kit in the appropriate folder. Create a new show in Kinetic Designer and save it…
Project creation
Tutorials – English » Certification tutorials » Projection mapping » Project creation
Project Folder and media In Windows Explorer, create a project folder with the proper subfolder hierarchy. Copy the media from the media kit into the proper subfolder and start Kinetic Designer. Create a new show and save it to your project folder. Import the…
Architectural mapping
Application notes » Architectural mapping
Architectural mapping configuration Set-up relies on: 1 x Modulo Kinetic Designer 2 x Modulo Kinetic V-Node servers with 4 outputs Versatile display capabilities: Multi-projector soft edge blending Video mapping with 2D and/or 3D warping tools Powerful image & video…
Architectural 1 – Projection study and simulation
Tutorials – English » Certification tutorials » Architectural video mapping » Architectural 1 – Projection study and simulation
For the purpose of this exercise, we will imagine the final result is to project on a castle of 28 meters wide by 18m high using two projectors. We will learn how to use Kinetic Designer’s 3D tools to perform a projection study, define the projectors’…
Architectural video mapping
Tutoriels – Français » Tutoriels de Certification » Architectural video mapping
Dans cet exercice nous allons aborder l’étude de projection dans Kinetic puis les outils de déformations 2D pour un mapping sur un château avant de réaliser le même exercice avec la calibration 3D. Enfin, nous programmerons quelques séquences et…
Architectural video mapping
Tutorials – English » Certification tutorials » Architectural video mapping
In this last exercise, we’ll apply what we have learnt on X-Maps with an architectural building and discover the 3D Engine available in Kinetic Designer. We will learn to: Do a projection study in Kinetic Designer Apply a manual warping of X-Maps to…
Architectural 4 – Program an architectural mapping show
Tutoriels – Français » Tutoriels de Certification » Architectural video mapping » Architectural 4 – Program an architectural mapping show
Dans cette partie nous ajouterons des media avec des pistes sonores et nous créerons des Tasks pour déclencher les séquences. Ensuite, nous ajouterons un device Calendar afin de trigger une Task.
Architectural 4 – Program an architectural mapping show
Tutorials – English » Certification tutorials » Architectural video mapping » Architectural 4 – Program an architectural mapping show
In this part we will add few media with sounds and create Tasks to launch the sequences. Then, we will add a Calendar device to trigger the Task.
Part 1 : Starting the Project
Tutorials – English » Certification tutorials » Live Event » Part 1 : Starting the Project
The first part of the exercise will start the project from an empty show. We will review the following notions: Configuring the V-Node server for multi-display Setting up Kinetic Designer in a multi-display environment Using Guides in the Preview panel Animating…
Architectural 1 – Etude de video projection et simulation
Tutoriels – Français » Tutoriels de Certification » Architectural video mapping » Architectural 1 – Etude de video projection et simulation
L’objet de cet exercice est de projeter sur un château de 28 mètres par 18. Nous avons utilisé les outils 3D de Kinetic Designer pour déterminer la position des projecteurs et les optiques nécessaires. Dans ce tutoriel nous verrons les étapes de réglage…
Architectural 3 – Calibration d’un video projector en 3D
Tutoriels – Français » Tutoriels de Certification » Architectural video mapping » Architectural 3 – Calibration d’un video projector en 3D
Nous avons un modèle 3D de notre monument, de fait il nous est possible de calibrer notre projecteur Pico dans la 3D à l’aide de l’outil de calibration Kinetic 3D Mapping. Pour ce faire il nous faut placer plusieurs points de calibration sur l’objet…
Sources creation
Tutorials – English » Certification tutorials » Live Event » Part 3 : Mixer » Sources creation
We’ll now create our sources in the Live Mixer. *Info : There are only two kinds of source you can add : Live sources and RenderSurface sources. Live sources are live signals from a NDI feed, HDMI, SDI, etc. RenderSurface sources are content displayed on a…
Presets creation
Tutorials – English » Certification tutorials » Live Event » Part 3 : Mixer » Presets creation
Presets can be used to quickly recall pre-configured layouts of your Mix Engines in your destinations. Creating a preset In the Live Mixer open the Presets tab and click the to add a preset. Set the Transition to 3 seconds. Set three sources into the…
Timeline creation
Tutorials – English » Certification tutorials » Architectural video mapping » Architectural 4 – Program an architectural mapping show » Timeline creation
Now let’s create the show’s timeline: Add a timeline and name it SHOW Add the castle-1 media and the associated sound file Put a Fade In and out time of 2 seconds Copy the two layers, go to the end of it Paste and replace the two layer by…
Media Creation
Useful Guidelines » Media Creation
Here are the recommendations for media creation in Modulo Kinetic.
Timeline Creation
Tutorials – English » Certification tutorials » X-Map Shapes » Timeline Creation
Using the media for the Shapes add the following content to the timeline: STEP TRIGGER FILENAME PLAY MODE 1 - Black Once 2 Pause Credit + Audio Once 3 Pause Jingle 1 + Audio Once…
Destinations creation
Tutorials – English » Certification tutorials » Live Event » Part 3 : Mixer » Destinations creation
The first step in setting up the Mixer is to create one or several destination(s). *Info : A destination is a pixel area in which we will be able to display and mix sources using the Mixer Engines (ME). One ME can contain only display one source at a time. There is no…
Timeline creation
Tutorials – English » Certification tutorials » Start project » Timeline creation
Playing media In the Timelines panel, double click on the name and rename it First Show. In the Media list panel, drag and drop the Red Loop from the media list to the timeline, a new layer will be created automatically. Fade in/out Double click on the…
Project
Kinetic Designer: User Interface » Top Menu » Project
Click on the “Project” menu to have access to the following actions: Project settings: Open the project settings panel. For more details, follow this link Relink assets…: Search if there is assets not found and open a popup window to help the relink of…
New show creation
Tutorials – English » Certification tutorials » Start project » New show creation
Creating the show Launch Kinetic Designer. From the Home Page, create a new show by clicking on New. Name it Start Project v1 and save it inside the ../01_SHOW/ subfolder created on the previous step. VNode Kinetic Designer is designed to control…
RenderSurface source creation
Tutorials – English » Certification tutorials » Live Event » Part 3 : Mixer » RenderSurface source creation
We will now create a source and extract a portion of our Render Surface for this source. In the Edit tab, click on + to create a new source and rename it BACKGROUND. In the Editor panel set the Input type to Render Surface and in the Freeze drop-down menu select…
Live sources creation
Tutorials – English » Certification tutorials » Live Event » Part 4 : Migrating to the media server » Live sources creation
We will now add Live inputs from the Deltacast card In the Media list panel, click the and select +Autodiscover Deltacast. In the pop-up list, choose a V-Node as reference.
X-Map creation
Useful Guidelines » X-Map creation
In this topic we will see how to create a Photoshop file in order to use it in the Modulo Kinetic. To do this we will start from an example of projection on a facade with 2 HD video projectors. Depending on the methodology used to create images, there are two options…
Architectural 2 – warping using X-Maps
Tutorials – English » Certification tutorials » Architectural video mapping » Architectural 2 – warping using X-Maps
Materials required: A pico projector + 1 castle-shaped kit + 1 mapping box. The media kit, the PSD template file, and the 3D model We position the castle in the mapping Box, we position the projector to project on the whole castle. in this tutorial we will…
Project settings
Kinetic Designer: User Interface » Top Menu » Project » Project settings
Click on the left tabs and choose the preference of your show: General Lock screen user interface: You can choose a user screen to display in lock screen mode. To lock/unlock desk, use keyboard shortcut Ctrl+ Shift + F12. Auto start task(master): Choose a task that…
Start project
Tutorials – English » Certification tutorials » Start project
In this first exercise we will discover the basics of Kinetic Designer and learn the workflow of a project. We will learn to: Create a project folder Create a new show Import Media Add a V-Node Create an output, perform basic warping and display an output on…
Project study
Tutorials – English » Video tutorials » Project study
Projection study: Download the tutorial pack here
Start project
Tutoriels – Français » Tutoriels de Certification » Start project
Ce premier exercice permet de découvrir les bases de Kinetic Designer et de prendre en main le workflow d’un projet. Nous allons apprendre les notions suivantes : Réglage en mode démo et sur un vrai serveur Création du dossier projet Transfert des…
Architectural 3 – Calibrate a projector in 3D
Tutorials – English » Certification tutorials » Architectural video mapping » Architectural 3 – Calibrate a projector in 3D
Because we have a realistic 3D model of our monument, it is interesting to calibrate our Pico projector thanks to the 3D Scene. With few points set at the right place, Kinetic will determinate the position of the Pico projector in the real world and will set the…
Sources Creation – Media
Tutorials – English » Certification tutorials » Live Event » Part 2 : Multi timelines / User interface » Sources Creation – Media
NDI is a protocol to transport video streams over a TCP/IP network. Many applications enable streaming video over the network using NDI. Most PTZ cameras support this protocol. There are also conversion boxes between NDI and HDMI/SDI. You can download some free…
Simulation en 3D
Tutoriels – Français » Tutoriels de Certification » Architectural video mapping » Architectural 1 – Etude de video projection et simulation » Simulation en 3D
La 3D peut être utile pour simuler la scénographie et la vidéo projection. Nous allons expérimenter cela en créant une render surface avec un pattern, appliquer cette Render Surface en tant que material sur le modèle 3D du Chateau. Aller dans Windows > Standard…
Architectural 2 – calibration 2D avec les X-Maps
Tutoriels – Français » Tutoriels de Certification » Architectural video mapping » Architectural 2 – calibration 2D avec les X-Maps
Matériels requis: Un projecteur pico + 1 kit de montage du château + 1 mapping box. Le media kit, Le template PSD, et le modèle 3D Positionner le chateau dans la mapping Box, et positionner le projecteur pour projeter sur tout le château. Dans ce tutoriel…
Timeline creation and basic warp
Tutorials – English » Certification tutorials » Projection mapping » Timeline creation and basic warp
Add the media Cube Pattern.png on the timeline. The image should be projected on your projector. If not, try right clicking on the Output and selecting Display on second screen. Check your connections. Warp in Keystone mode Select the Output and in the…
DELTA-1×12G
Hardware » Cabling guide » Deltacast live inputs » DELTA-1×12G
This card supports: - 4 × 3G inputs up to 1920×1080@60fps or - 1 × 12G input + 2 × 3G inputs —> should be RX 2 and RX 3 (check)
Prepare our new project
Tutorials – English » Other tutorials » Video projection study on a cylinder using 3D » Prepare our new project
As for each new project, we define a new Project Folder and we create our folders. As we will have .MOP project files, one PNG pattern, and one 3D file we create this tree structure: 01_SHOW will contain the .MOP and project backup files 02_MEDIA will contain the…
Live event Part 1
Tutoriels – Français » Tutoriels de Certification » Live Event » Live event Part 1
La première partie de cet exercice concerne la création d’un projet complet depuis zéro. Nous aborderons les concepts suivants : La création du projet Le réglage du media serveur ou du laptop en mode Demo La copie de media vers le media serveur La…
Entire project : Immersive Room Experience
Tutorials – English » Other tutorials » Entire project : Immersive Room Experience
In this tutorial we will see how to work on an entire project inside Kinetic Designer. We will just download few Media to work with, but we will see how we prepare a full project from scratch. The main purpose of this exercice is to : Implement video projectors…
Overview of the prepared Kinetic Project
Tutorials – English » Other tutorials » Setup a XR studio with a green screen » Overview of the prepared Kinetic Project
As you should notice in the media kit you downloaded, we already prepared these elements in the Kinetic Designer project : - Creating Render Surfaces for the Background, TV content from the 3D Scene - Importing media and play it into Timelines - Importing a 3D scene -…
Setup and copy of the project
Tutorials – English » Certification tutorials » Live Event » Part 4 : Migrating to the media server » Setup and copy of the project
As this tutorial has demonstrated, it is possible to prepare an entire project with Kinetic Designer on your laptop, without being connected to the media servers, and transfer the show to the final setup once on the venue. We will assume the following setup is made…
Projection de contenu en utilisant le tracking
Tutoriels – Français » Autres tutoriels » Projection de contenu en utilisant le tracking
KineMotion est une solution de tracking en temps réel développée par Modulo Pi. Il peut être utilisé pour faire une projection dynamique, FX interractifs, follow-spot automatique, spatialisation audio, et plus. Pour plus d’information veuillez-vous référer…
Ajouter des tasks en utilisant les Keywords
Tutoriels – Français » Autres tutoriels » Projet entier : Immersive Room Experience » Chapitre 8 : Créer une User Interface de show control » Ajouter des tasks en utilisant les Keywords
Supprimer les rectangles dont nous ne voulons pas et n’en garder qu’un Glisser & déposer un élémént Task depuis la toolbox *Par défaut, un élémént Task affiche toutes les tasks que nous avons, c’est pourquoi nous allonrs utiliser un…
Dupliquer le projecteur en utilisant le Cloner modifier
Tutoriels – Français » Autres tutoriels » Etude de video projection sur un cylindre en utilisant la 3D » Dupliquer le projecteur en utilisant le Cloner modifier
Dans la fenêtre 3D Scene, cliquer sur + puis ajouter un Cloner Modifier Dans Hierarchy, glisser déposer ce projecteur dedans Sélectionner le cloner créé et changer son type en Radial Augmenter le nombre de count, vous pouvez aussi faire l’opération…
Open the Designer project and prepare the calibration
Tutorials – English » Other tutorials » Setup a XR studio with a green screen » Open the Designer project and prepare the calibration
Open the prepared project If you don’t have it yet, download the media kit here Open Kinetic Designer Choose Open and browse into your computer Add the Deltacast HDMI or SDI source In the Media tab, click on and add a Deltacast media Set the…
Tracking to project interactive content with one video projector
Tutorials – English » Other tutorials » Tracking to project interactive content with one video projector
KineMotion is a real-time tracking solution fully developped by Modulo Pi. It can be used to perform dynamic projection mapping, interactive video effects, automatic follow spot, spatial audio, and more. For more information, please check the KineMotion specification…
Chapter 0 : Download media and prepare the Project Folder
Tutorials – English » Other tutorials » Entire project : Immersive Room Experience » Chapter 0 : Download media and prepare the Project Folder
Download media and prepare the Project Folder Let’s start this exercice by downloading the Full Project Folder we prepared. Unzip and copy/paste this folder to your storage drive For each project we keep the same file tree in order to keep it clear for…
Chapitre 4 : Automatiser l’exposition en utilisant des Tasks
Tutoriels – Français » Autres tutoriels » Projet entier : Immersive Room Experience » Chapitre 4 : Automatiser l’exposition en utilisant des Tasks
Dans cet exercice nous allons automatiser des actions sur des Devices et Timelines en utilisant les Tasks.
Chapitre 0 : Télécharger les media et preparer le Project Folder
Tutoriels – Français » Autres tutoriels » Projet entier : Immersive Room Experience » Chapitre 0 : Télécharger les media et preparer le Project Folder
Téléchargement du projet complet Commencons par télécharger le Project Folder que nous avons préparé. Dézipper et copier/coller ce dossier sur votre disque de travail Pour chaque projet nous essayons de garder la même arborescence de fichier. Ainsi, pour…
Etude de video projection sur un cylindre en utilisant la 3D
Tutoriels – Français » Autres tutoriels » Etude de video projection sur un cylindre en utilisant la 3D
Introduction Dans cet exercice, nous allons voir comment faire une étude de projection vidéo à l’aide de Kinetic Designer et de ses outils 3D. L’étude de projection prendra l’exemple d’un cylindre. Voici les différentes étapes que nous…
Copie du Project Folder et création d’un nouveau projet
Tutoriels – Français » Tutoriels de Certification » Live Event » Live event Part 1 » Copie du Project Folder et création d’un nouveau projet
Copier le Project Folder CAR-SHOW dans le disque D:/ drive ou C:/PROJECTS si vous êtes sur un laptop. Lancer Kinetic Designer et sauvegarder le fichier show dans le dossier 01_SHOW et le nommer Live Event 1
Ajouter une Led en retour d’information sur l’UI
Tutoriels – Français » Autres tutoriels » Projet entier : Immersive Room Experience » Chapitre 8 : Créer une User Interface de show control » Ajouter une Led en retour d’information sur l’UI
Ouvrir la fenêtre des Devices et ajouter 3 devices LED Dans la fenêtre Tasks sélectionner Go Show et glisser & déposer le device Led “UI show playing” pour en faire une subtask Sélectionner cette subtask et définir son state ON Répéter cela…
Chapter 1 : Import a 3D model and make the video projection study
Tutorials – English » Other tutorials » Entire project : Immersive Room Experience » Chapter 1 : Import a 3D model and make the video projection study
In this chapter we will play with the 3D space of Kinetic Designer.
Chapitre 1 : Importer un modèle 3D et faire l’étude de video projection
Tutoriels – Français » Autres tutoriels » Projet entier : Immersive Room Experience » Chapitre 1 : Importer un modèle 3D et faire l’étude de video projection
Dans ce chapitre nous allons naviguer dans l’espace 3D de Kinetic Designer et utiliser ses outils pour intégrer les video projecteurs.
Certification tutorials
Tutorials – English » Certification tutorials
Introduction The following tutorials guide you in discovering and efficiently using Kinetic Designer and are designed to develop the operator’s autonomy. As the tutorials unfold the instructions will become more generic and will go into less details on the…
Tutoriels de Certification
Tutoriels – Français » Tutoriels de Certification
Introduction Ces tutoriels vous guident pas à pas dans la découverte et l’utilisation de Kinetic Designer avec une attention particulière portée sur la prise d’autonomie de l’opérateur. Au fur et à mesure les consignes deviendront plus générales et ne…
Modulo Pi Learning Kit
Starter guide » Modulo Pi Learning Kit
The Modulo Pi Learning kit is available on our eShop. The kit was designed to help you discover and practice Modulo Player and Modulo Kinetic. A full series of tutorials is based on this kit and will show you how to use our media server solutions. Thanks to the…
Création du projet et copie des media
Tutoriels – Français » Tutoriels de Certification » Architectural video mapping » Architectural 1 – Etude de video projection et simulation » Création du projet et copie des media
Charger le projet : Copier le dossier télécharger dans votre dossier de travail (C:/ sur un laptop, D:/ si vous avez un media serveur) Lancer Kinetic Designer. Cliquer sur Load, dans 01_SHOW ouvrir le Project file Architectural part 1 – begin Vous pouvez…
Tutoriels – Français
Tutoriels – Français
Cette section se compose de trois types de tutoriels pour vous accompagner dans l’apprentissage de Kinetic Designer. Tutoriels de Certification Des guides étape par étape: Pour découvrir Kinetic Designer et ses fonctionnalités de bases (Espace…
3D Environment
Tutorials – English » Certification tutorials » Architectural video mapping » Architectural 1 – Projection study and simulation » 3D Environment
Project Creation By now, we assume you have all the knowledge to quickly create the basic setup for a new show. Create a new project folder with the proper hierarchy and copy the media kit into it. Create a new show and import the media from the media…
Interactive Video Launcher
Tutorials – English » Video tutorials » Interactive Video Launcher
Overview In this tutorial we will learn how to build an interactive video launcher using touchless sensors to map out zones where a user can interact to launch the playback of a video. While this project will be prototyped using a Leap Motion hand sensor and a…
3D LIDAR (Ouster)
Tutorials – English » Video tutorials » 3D LIDAR (Ouster)
Overview In this tutorial we will learn how to connect to a 3D LIDAR’s point cloud stream and track movement on a designated plane. This project will be prototyped using an Ouster OS-0 3D LIDAR and a single video projector aimed at the floor on which we will…
Render Graphs
Tutorials – English » Video tutorials » Render Graphs
Overview In this tutorial we will cover render graphs, what they are and how they can be used in your shows to create complex visual effects. We will also discover how to link sensor data to parameters in the render graph to create interactive environments.…
First steps with Kinetic Designer
Tutorials – English » Video tutorials » First steps with Kinetic Designer
Introduction !This tutorial was made using an older version of Kinetic Designer and will be updated to a newer version soon. Thank you for your understanding. This tutorial introduces the basics of working in Kinetic Designer and is a great place to start if you are…
Projection study and show simulation
Webinars – English » Projection study and show simulation
3D projection study and show simulation Through this webinar, you will discover our 3D tools for projection study and show simulation. These tools are available through the Modulo Kinetic media server, or using a Modulo Pi dongle equipped with the Modulo Kinetic…
Etude de projection et simulation de show
Webinaires – Français » Etude de projection et simulation de show
Etude de projection et simulation de show en 3D temps réel A travers ce webinaire, découvrez nos outils dédiés à l’étude de projection et la simulation de show en 3D temps réel. Ces outils sont disponibles via le média serveur Modulo Kinetic, ou en…
Projection mapping
Tutorials – English » Certification tutorials » Projection mapping
In this second exercise we will introduce the use of the Warp and X-Map features of Kinetic Designer. We will assume that you have followed the Start Project tutorial and that you are now familiar with the basic actions covered. We will learn to: Project a media…
Connect to a VNode
Tutorials – English » Video tutorials » Connect to a VNode
Introduction !This tutorial was made using an older version of Kinetic Designer and will be updated to a newer version soon. Thank you for your understanding. This tutorial teaches how to work with V-Node servers and configure them using your Kinetic Designer…
Part 4 : Migrating to the media server
Tutorials – English » Certification tutorials » Live Event » Part 4 : Migrating to the media server
In this final part of the exercise we will see how to set up the project on the V-Node Media Server as we would in a real life scenario. We will review the following notions: Server configuration Transfering the project folder Calibrating and blending the two…
Repatching of sources in the Live Mixer
Tutorials – English » Certification tutorials » Live Event » Part 4 : Migrating to the media server » Repatching of sources in the Live Mixer
We can now repatch the live sources in the mixer to point to the two Deltacast live sources (SDI) instead of the NDI sources previously used. Conclusion This demonstrates how quickly the project can be deployed on site as most of the preparation can be done…
Start of Modulo Kinetic Designer
Starter guide » Modulo Kinetic media server » Start of Modulo Kinetic Designer
You can now launch the Modulo Kinetic Designer application on your PC. Then, follow the Start Project tutorial available in English and French. You should now see your Modulo Kinetic VNode when you launch the Modulo Kinetic Designer, and go to the menu V-Nodes and…
EDID and Eyefinity Setup
Tutorials – English » Certification tutorials » Live Event » Part 4 : Migrating to the media server » EDID and Eyefinity Setup
We will now force an EDID on the 4 outputs and setup Eyefinity to create an extended desktop over the 4 screens. EDID stands for Extended Display Identification Data. We use the term to refer to a standardized data exchange where a display communicates its…
Particles
Tutorials – English » Video tutorials » Particles
Particles: Windy Venus: Download the tutorial pack here Smoke explosion: Download the tutorial pack here Pastel anemon: Download the tutorial pack here Fur spiral smash: Download the tutorial pack here
Create a new show and Add devices
Tutorials – English » Other tutorials » Camera AR » Create a new show and Add devices
Create a new project Open Kinetic Designer Choose New and save it to a new folder in the disk D In the medialist, Add a deltacast media Set the deltacast parameters regarding to your configuration (HDMI or SDI and 50 or 60 FPS) Create a Vnode and his…
Camera AR
Tutorials – English » Other tutorials » Camera AR
In this tutorial we will see how to calibrate and use Camera AR functionnality in Modulo Kinetic. Requirements for this exercice Panasonic AW-UE150W 1 Kinetic Designer 1 Kinetic V-Node with Deltacast Live capture card
3D calibration
Tutorials – English » Video tutorials » 3D calibration
3D calibration: Part 1: Download the tutorial pack here Part 2: Download the tutorial pack here
Live mixer – Sources
Tutorials – English » Certification tutorials » X-Map Shapes » Live mixer – Sources
As seen previously in the Live Event tutorial, there are 2 types of sources in the Live Mixer. Live sources can point to live feeds either on the Deltacast input cards (SDI or HDMI) or streamed via NDI Render Surface sources can map portions of our rendering…
Show control
Tutorials – English » Video tutorials » Show control
Show control: Download the tutorial pack here
Work with timelines
Tutorials – English » Video tutorials » Work with timelines
Work with timelines: Download the tutorial pack here
First steps in 3D
Tutorials – English » Video tutorials » First steps in 3D
First steps in 3D: Download the tutorial pack here
Work with 3D engine
Tutorials – English » Video tutorials » Work with 3D engine
Work with the 3D engine: Download the tutorial pack here
Add another camera to the XR scene
Tutorials – English » Other tutorials » Setup a XR studio with a green screen » Add another camera to the XR scene
In this second part of the exercice we will add a new camera to the XR scene, the same camera we used until now the Panasonic AW-UE150 camera. To do so we will repeat the steps we did before for the first camera, and add a new Render Surface for this…
Setup a XR studio with a green screen
Tutorials – English » Other tutorials » Setup a XR studio with a green screen
XR principle XR, meaning eXtended Reality, is a technology that mixes real camera feed with Background Replacement, Augmented Reality and Virtual Reality. For that purpose, we get a camera live feed, camera zoom-shift informations in real-time, and a green…
Get familiar with the 3D tools and set the projector position
Tutorials – English » Other tutorials » Video projection study on a cylinder using 3D » Get familiar with the 3D tools and set the projector position
*For a better experience we recommend to use a mouse. In this section of the tutorial we will focus on the 3D tools to navigate. First we will give some light and color to the 3D elements. Right click in the 3D Viewer and add a Light Use the Move tool (pressing M…
Configure the Panasonic AW-UE150 camera
Tutorials – English » Other tutorials » Setup a XR studio with a green screen » Configure the Panasonic AW-UE150 camera
Beforehand, ensure you that : The camera is connected on the same network as the Designer and in the same IP address range. The camera is powered with POE++ *If you encounter a matter connecting your camera please refer you to the camera documentation on the…
Basic setup and start of Modulo Kinetic Designer
Starter guide » Modulo Kinetic Designer 2D and Modulo Kinetic Designer 2D+3D » Basic setup and start of Modulo Kinetic Designer
Your Modulo Pi key is activated, your Modulo Kinetic Designer is installed. Now, it’s time to play! Firewall and antivirus: First, check that your antivirus will not prevent the applications to launch or to communicate. Usually, an exception is added…
Autres tutoriels
Tutoriels – Français » Autres tutoriels
Introduction Ces tutoriels ne font pas partie de la certification Niveau 1. Ils vous guideront dans différents aspects de Kinetic Designer en application dans des projets concret. Sommaire Autocalibration de 5 video projecteurs sur un dome Projection de…
Toggle the V-Node Online
Tutorials – English » Certification tutorials » Live Event » Part 1 : Starting the Project » Toggle the V-Node Online
*If you are running demo mode you may skip this step. Toggle the V-Node ‘Online’ In the V-Nodes tab, right-click on your V-Node and select Start. The indicator should turn from red to orange. Note that the V-Node was already started in a…
Calibrate the camera
Tutorials – English » Other tutorials » Setup a XR studio with a green screen » Calibrate the camera
Camera calibration will place the Panasonic camera in our 3D Scene at its right position. Use an objet to calibrate the camera position and define the 0,0,0 position To realize the camera calibration, you will need a simple geometric shape object which you know the…
Using Filters
Tutorials – English » Certification tutorials » Projection mapping » Using Filters
We’ll see how to create presets to automatically position media in the proper portion of the Render Surface Creating Filters In the Media List panel, select the Light Rain 1 media and in the Editor panel open the Filter tab. Notice the Preset…
Media list
Kinetic Designer: User Interface » Media list
The Media list panel contains all the media available in your project and displays some metadata for each of them (pixel size, file size, codec, timestamp, etc.) The bottom toolbar enables the following: Add menu to create new media or import…
Application notes
Application notes
Modulo Kinetic is a fully-integrated media server solution which can be used in a great variety of live or permanent applications. Visit pages of the section and discover diagrams illustrating some of the many possibilities offered by Modulo Kinetic and its advanced…
Version 4.0
Release Notes » Version 4.0
Version 4.0 – May 18, 2021: Release Note In May 2021 and after months of development, Modulo Kinetic makes a major step forward with the release of the version 4. As the biggest release ever, Modulo Kinetic V4 comes with a revamped user interface, a variety of…
Création du projet
Tutoriels – Français » Tutoriels de Certification » Start project » Création du projet
Créer le dossier projets Avant de lancer Kinetic Designer, créer un dossier dédié dans Windows Explorer pour les fichiers du projet et les médias. Lorsque vous importez des médias dans votre projet, Kinetic Designer utilise des chemins d’accès relatifs…
Part 2 : Multi timelines / User interface
Tutorials – English » Certification tutorials » Live Event » Part 2 : Multi timelines / User interface
In the second part of this exercise we will continue add some live inputs, create more timelines and display on the other two outputs of our server. We will review the following notions : Creating and using NDI Live media, counters, and text media Creating and…
File
Kinetic Designer: User Interface » Top Menu » File
The File menu gives access to the following actions: Action Description Home Access the Home page. More details New Create a new modulo kinetic project Load Select and load an existing modulo kinetic…
Ajouter les V-Nodes et les configurer
Tutoriels – Français » Autres tutoriels » Projet entier : Immersive Room Experience » Chapitre 2 : Préparer les V-Nodes et Render Surfaces pour les Media » Ajouter les V-Nodes et les configurer
Ajouter des V-Nodes Maintenant que l’étude de video projection est faite nous avons que nous avons 9 video projecteurs donc 9 outputs, plus un Speakers screen, plus un Monitoring Output. Nous avons des V-Nodes avec 4 outputs, dont voici la répartition : …
3D LIDAR (Ouster)
Tutoriels – Français » Tutoriels vidéo » 3D LIDAR (Ouster)
Aperçu Dans ce tutoriel nous allons voir comment se connecter au nuage de point live d’un LIDAR 3D, puis sélectionner un plan sur lequel appliquer un tracking des déplacements d’objets ou de personnes. Ce projet sera prototypé en utilisant un LIDAR 3D…
Lecteur Video Interactif
Tutoriels – Français » Tutoriels vidéo » Lecteur Video Interactif
Introduction Dans ce tutoriel, nous allons apprendre comment construire un lecteur vidéo interactif en utilisant des capteurs sans contact pour isoler des zones de notre projection avec lesquelles un utilisateur peut interagir pour lancer la lecture d’une…
Calibration of the projector
Tutorials – English » Certification tutorials » Architectural video mapping » Architectural 3 – Calibrate a projector in 3D » Calibration of the projector
In this second part of this tutorial we will : Enable the second output of your laptop to send content to the Pico projector Move the points to the real corners of the Castle Calibrate the projector Step 1 : Display the points Right click on the output and…