Generate standard oscillator type signals.
LFO stands for Low Frequency Oscillator.
Properties
You can switch the Signal Type directly on the node :
- Square
- Sinusoid
- Triangle
- Sawtooth
Other properties :
Period: Sets the period (in seconds).
Default : 1.0
Phase: Sets the phase.
Default : 0.0
Offset: Sets an offset for the output.
Default : 0.0
Amplitude: Sets the amplitude of the wave.
Default : 20
Duty Cycle: Sets the duty cycle for the wave.
Default : 0.5- This parameter has no effect on Triangle and Sawtooth waves.
Duty cycle example :
Inputs
| Name | Type | Description |
|---|---|---|
| Period | Float | Adjust the period of the wave (in seconds) |
| Phase | Float | Adjust the phase of the wave to add a temporal offset |
| Offset | Float | Offset the output value |
| Amplitude | Float | Adjust the amplitude of the wave |
| DutyCycle | Float | Adjust the duty cycle of the wave (see example above) |
Outputs
| Name | Type | Description |
|---|---|---|
| Float | Float | Current value of the wave signal |
| Cycle | Integer | Current cycle number. Increments by 1 each cycle. |
Need more help with this?
Don’t hesitate to contact us here.